THERMALLY CONDUCTIVE

Our epoxy, urethane and silcone formulated adhesives & sealants are
characterized by very high peel and shear strenght,excellent adhesion
to metals and plastics, including glass, ceramic, gold, PVC and rubbers;
solvent, acid and alkali resistant. Most product are available in our easy
to use Mixpac cartriges, Burst pac's and syringes. They are also available
in various bulk kit sizes as well.
Product
Name		 Product Description
(Mouse Over for Details)		 Viscosity
Ratio		 Gel
Cure		 Hardness
Wm⁰K		 Operating
°C
TDS EPOXY  (TWO PART)
PTE-47850 Black Filled Epoxy
Excellent thermally conductive		 6,500
4:1		 2hr
24hr		 80D
1.3		 -55 to +150
PTE-47851 Black Filled epoxy
Excellent thermally conductive		 40,000
4:1		 1hr
24hr		 90D
1.3		 -55 to +150
ATE-26522 Black Filled Epoxy
Heat cure for low stress		 40,000
10:1		 10hr
72hr		 92D
1.4		 -55 to +180
PTE-47853 Black Flexible Filled Epoxy
Where Flexibility is Required		 5,500
4:1		 1hr
24hr		 80A
1.3		 -40 to +180
Product
Name		 Description
(Mouse Over for Details)		 Viscosity DS
V/mil 		Hardness
Wm⁰K		 Operating
°C
TDS  CASTING
PTE-36977 Colored Filled Epoxy
High Performance Casting Epoxy		 40,000 510 95D
1.3		 -55 to +200
Product
Name		 Product Description
(Mouse Over for Details)		 Viscosity
Ratio		 Cure Hardness
Wm⁰K		 Operating
°C
TDS HEATSINK BONDING
ATE-46446 Gray Filled Epoxy Paste
Passes outgassing		 8,000
100:9		 24hr* 85D
3.0		 -55°C to +175°C
ATE-46439 Gray Filled Epoxy Paste
Passes outgassing		 15,000
100:9		 24+hr* 85D
3.0		 -55°C to +175°C
ATE-46440 Gray Filled Epoxy Paste
Passes outgassing		 10,000
100:9		 24hr* 85D
1.925		 -55°C to +200°C
TDS EPOXY  (ONE PART)
Product
Name		 Description
(Mouse Over for Details)		 Viscosity SG
CTE 		Hardness
Wm⁰K		 Operating
tg °C
ATE-10120 Gray or White Filled Epoxy
Thermally Conductive		 25,000 1.6
55		 92D 
1+		 -55 to +155
80°C
ATE-26522 Black Filled epoxy
Fast cure for small applications		 40,000 1.88
55		 92D
1.4		 -55 to +180
140
TDS URETHANE (TWO PART)
Product
Name		 Product Description
(Mouse Over for Details)		 Viscosity
Ratio		 Gel
Cure		 Hardness
Wm⁰K		 Operating
°C
PTU-46201 Black Filled Urethane
Good Flame Retardent protection		 70,000
13:1		 2hr
48hr		 70A
1.4		 -55 to +125
TDS SILICONE (TWO PART)
Product
Name		 Product Description
(Mouse Over for Details)		 Viscosity
Ratio		 Gel
Cure 		Hardness
Wm⁰K		 Operating
°C
PTS-56227 White Filled Silicone
Fast Room Temperature Cure		 2,500
2:1		 10min
40min		 50A
1		 -55 to +200
PTS-46303-1 Dark Gray Filled Silicone
Heat Cure		 13,000
1:1		 4hr 70A
1.38		 -55 to +200
PTS-46303 Dark Gray Filled Silicone
Heat Cure		 8,000
100:7.6		 4hr 65A
1.38		 -55 to +200
TDS SILICONE (ONE PART)
PTS-46313 Gray Filled silicone
Excellent thermal properties		 10,000 1.6
HEAT		 45A
1.4		 -65 to +200
IMPORTANT: The information contained in this data sheet corresponds to the present state of our knowledge; it is intended for your guidance but we are not bound by it since we are not in the position to exercise control over the manner in which our products are used. Moreover, the attention of the user is drawn to the risks that could occur should a product be used for an application other than for which it is intended.
©2011.  All rights reserved.   Tel: (800) 807 2294   Fax: (800) 807 2294  info@protavicamerica.com